Do you have a question about the Cisco UCS C200 M2 and is the answer not in the manual?
Tcase | 76 °C |
---|---|
Bus type | QPI |
Stepping | D0 |
FSB Parity | No |
Processor code | SLBF8 |
Processor cache | 4 MB |
Processor cores | 4 |
Processor model | E5506 |
System bus rate | 4.8 GT/s |
Processor series | Intel Xeon 5500 Series |
Processor socket | Socket B (LGA 1366) |
Processor codename | Nehalem EP |
Motherboard chipset | - |
Processor frequency | 2.13 GHz |
Processor cache type | Smart Cache |
Processor lithography | 45 nm |
Processor system type | DP |
Processor manufacturer | Intel |
Processor package size | 42.5 x 45 mm |
Processor front side bus | - MHz |
Processor operating modes | 64-bit |
ECC supported by processor | Yes |
Thermal Design Power (TDP) | 80 W |
Number of processors installed | 1 |
CPU multiplier (bus/core ratio) | 16 |
Maximum number of SMP processors | 2 |
Memory types supported by processor | DDR3-SDRAM |
Memory channels supported by processor | Triple |
Memory clock speeds supported by processor | 800 MHz |
Memory bandwidth supported by processor (max) | 19.2 GB/s |
Maximum internal memory supported by processor | 144 GB |
HDD size | - \ |
RAID levels | 0, 1 |
Optical drive type | DVD-RW |
Total storage capacity | 0 GB |
Maximum storage capacity | 0 TB |
Number of HDDs installed | 0 |
Internal memory | 4 GB |
Maximum internal memory | 96 GB |
Memory layout (slots x size) | 1 x 4 GB |
Graphics card | G200 |
Networking features | Gigabit Ethernet |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Power supply | 650 W |
Power requirements | AC 120/230 V, 50/60 Hz |
Chassis type | Rack (1U) |
Processor ARK ID | 37096 |
Depth | 706.1 mm |
---|---|
Width | 429.3 mm |
Height | 43 mm |
Details the front panel of the Cisco UCS C200 M2 SFF rack server with control module.
Details the rear panel of the Cisco UCS C200 M2 SFF rack server.
Identifies the product ID (PID) for the base Cisco UCS C200 M2 SFF rack server.
Lists available Intel Xeon Westmere-EP x56xx family CPUs for the server.
Details standard memory features, organization, and population rules for DDR3 ECC DIMMs.
Provides an internal view of the C200 M2 chassis with the top cover removed.
Details the physical layout of CPUs, DIMM channels, banks, and slots on the motherboard.
Guidance on populating DIMMs for optimal server memory configuration and performance.
Provides physical dimensions and weight specifications for the UCS C200 M2 server.
Details AC input voltage, frequency, current, and power supply output specifications.
Lists operating temperature, humidity, vibration, shock, and electrostatic discharge limits.