Cisco UCS C200 M2 - Select CPU(s)

Cisco UCS C200 M2 High-Density SFF Drive Rack-Mount Server
10
CONFIGURING the SERVER
STEP 2 SELECT CPU(s)
The standard CPU features are:
■ Intel Xeon 5600-series (Westmere-EP) CPUs
■ Intel 5520 chipset
■ Cache size of 4, 8, or 12 MB
Select CPUs
The available CPUs are listed in Table 3.
Table 3 Available Intel CPUs: Xeon Westmere-EP x56xx Family
Product ID (PID)
Intel
Number
Clock
Freq
(GHz)
Power
(W)
Cache
Size (MB)
Cores QPI
Highest DDR3 DIMM
Clock Support (MHz)
1
Notes . . .
1. If higher or lower speed DIMMs are selected than what is shown in the table for a given CPU, the DIMMs will be
clocked at the lowest common denominator of CPU clock and DIMM clock. For example:
Selecting lower-speed DIMMs
: If you use an X5650 CPU (which can support up to 1333-MHz DIMMs) with 1066-MHz
DIMMs, the DIMMs will be clocked at the lower speed of 1066 MHz.
Selecting higher-speed DIMMs:
If you use 1333-MHz DIMMs with an E5620 (which can support up to 1066-MHz DIMMs),
the DIMMS will be clocked at the lower speed of 1066 MHz.
A01-X0117 X5675 3.06 95 12 6 6.4 GT/s 1333
A01-X0105 X5650 2.66 95 12 6 6.4 GT/s 1333
A01-X0120 E5649 2.53 80 12 6 5.86 GT/s 1333
UCS-CPU-E5645 E5645 2.40 80 12 6 5.86 GT/s 1333
A01-X0111 E5620 2.40 80 12 4 5.86 GT/s 1066
A01-X0106 L5640 2.26 60 4 6 5.86 GT/s 1333
A01-X0107 L5630 2.13 40 12 4 5.86 GT/s 1066
A01-X0123 E5606 2.13 80 8 4 4.8 GT/s 1066
A01-X0108 L5609 1.86 40 12 4 4.8 GT/s 1066