Cisco C891-24X/K9 - User Manual

1-108
Cisco Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Cisco 860, 880, 890 Series
Figure 1-67 shows the front panel of the Cisco 897VAW and the Cisco 897VAMW routers.
Figure 1-67 Front Panel of the Cisco 897VAW and the Cisco 897VAMW Routers
Figure 1-68 shows the back panel of the Cisco 897VAMW Router.
Figure 1-68 Back Panel of the Cisco 897VAMW Router
1
344770
1 LEDs
7 6 GELAN 5 4
3 2 POE 1 0
8
GE WAN
54VDC 1.2A
12VDC 2.5A
VDSL/ADSL
overPOTS
CONSOLE
RESET
344772
11
1 2 3 4 7 8 9 10
5 6
1 GE WAN interface 7 On/Off switch
2 SFP port 8 Reset button
3 USB port 9 Earth ground connection
4 8-port Gigabit Ethernet switch
1
10 Kensington security slot
5 Console/Auxiliary port 11 VDSL / ADSL over POTS
6 Power connector
1. Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with
the factory order, you must order and install it to enable the PoE function.

Cisco C891-24X/K9 Specifications

General

Brand	Cisco
Model	C891-24X/K9
Category	Network Router
Language	English

Summary

Cisco 897 VAW and 897 VAMW Routers

Front Panel Overview

Front Panel Overview of the Cisco 897VAW/VAMW routers, detailing LEDs and layout.

Cisco C897 VAB-K9 ISR

Back Panel Overview

Back Panel Overview for the Cisco C897VAB-K9 ISR, showing numbered components.

Hardware Features

LEDS

Memory

Feature Summary

Installing the Cisco 810 ISR

Installing the Cisco PoE+ Splitter

Provides step-by-step instructions for installing the optional PoE+ splitter accessory.

Installing the SIM Card

Installing the Cisco 812 ISR

Cisco 812 ISR Mounting Procedures

Covers mounting hardware, brackets, clips, and methods for installing the Cisco 812 ISR.

Installing the Cisco 819 ISR

SIM Card Installation

Mounting Options

Router Ground Connection

Explains how to install the router's earth ground connection according to safety standards.

Installing the Cisco 860, 880, 890 ISR

Installation Procedures

Covers installation steps for Cisco 860/880/890 ISRs, including mounting and grounding.