Cisco Catalyst 3560-CX Product Overview

•
Cisco Prime Infrastructure
Cisco Prime Infrastructure combines the wireless functionality of Cisco Prime Network Control System
(NCS) and the wired functionality of Cisco Prime LAN Management Solution (LMS), with application
performance monitoring and troubleshooting capabilities of Cisco Prime Assurance Manager. For more
information, see the Cisco Prime Infrastructure documentation on Cisco.com.
•
Catalyst Smart Operations
The Smart Install feature provides a single point of management (director) in a network. You can use it
to provide a zero touch image and configuration upgrade of newly deployed switches and image and
configuration downloads for any client switches. For information, see the Cisco Smart Install
Configuration Guide on Cisco.com.
Auto Smartports macros dynamically configure ports based on the device type detected on the port.
When the switch detects a new device, it applies the appropriate Auto Smartports macro on the port.
For information about configuring Auto Smartports, see the switch software configuration guide on
Cisco.com.
Network Configurations
See the switch software configuration guide on Cisco.com for network configuration concepts and examples
of using the switch to create dedicated network segments and interconnecting the segments through Fast
Ethernet and Gigabit Ethernet connections.
Catalyst 3560-CX and 2960-CX Switch Hardware Installation Guide
14
Product Overview
Network Configurations

Cisco Catalyst 3560-CX Specifications

General

Model	WS-C3560CX-8PC-S
Switching Capacity	20 Gbps
Product Type	Switch
Manageable	Yes
Layer Supported	Layer 3
Jumbo Frame Support	Yes
Jumbo Frame Size	9198 bytes
Input Voltage	100 - 240 VAC
Operating Temperature	32 to 113°F (0 to 45°C)
Power Supply	Internal
Ports	8 x 10/100/1000 Ethernet Ports
Uplink Ports	2 x 1G SFP
PoE	PoE+
Form Factor	Desktop, Wall-mountable
MAC Address Table Size	16, 000 entries
Power Source	AC