Data Sheet
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 28
Ease of Operations
The Cisco Catalyst 3750-X and 3560-X help reduce the operating costs through:
●
Cisco Catalyst Smart Operations
●
Easy to use deployment and control features
●
Advanced, intelligent network management tools
Cisco Catalyst Smart Operations
Cisco Catalyst Smart Operations re a comprehensive set of capabilities that simplify LAN deployment, configuration,
and troubleshooting. In addition to adaptive, always on technologies such as StackWise and StackPower, Cisco
Catalyst Smart Operations enable zero touch installation and replacement of switches, fast upgrade, as well as ease
of troubleshooting with reduced operational cost. Cisco Catalyst Smart Operations is a set of features that includes
Smart Install, auto Smartports, Smart Configuration. and Smart Troubleshooting to enhance operational excellence:
●
Cisco Smart Install is a transparent plug and play technology to configure the Cisco IOS Software image
and switch configuration without user intervention. Smart Install utilizes dynamic IP address allocation and the
assistance of other switches to facilitate installation providing transparent network plug and play.
●
Cisco Auto Smartports provide automatic configuration as devices connect to the switch port, allowing auto
detection and plug and play of the device onto the network.
●
Cisco Smart Configuration provides a single point of management for a group of switches and in addition
adds the ability to archive and backup configuration files to a file server or switch allowing seamless zero
touch switch replacement. .
●
Cisco Smart Troubleshooting is an extensive array of debug diagnostic commands and system health
checks within the switch, including Generic Online Diagnostics (GOLD) and Onboard Failure Logging (OBFL).
Easy to Use Deployment and Control Features
●
Embedded Event Manager (EEM) is a powerful and flexible feature that provides real-time network event
detection and onboard automation. Using EEM, customers can adapt the behavior of their network devices to
align with their business needs. This feature requires IP Services feature set.
●
IP service-level agreements (SLAs) enable customers to assure new business-critical IP applications, as
well as IP services that utilize data, voice, and video, in an IP network. This feature requires IP Services
feature set.
●
Dynamic Host Configuration Protocol (DHCP) autoconfiguration of multiple switches through a boot server
eases switch deployment.
●
Automatic QoS (AutoQoS) simplifies QoS configuration in voice over IP (VoIP) networks by issuing interface
and global switch commands to detect Cisco IP phones, classify traffic, and help enable egress queue
configuration.
●
Stacking master configuration management and Cisco StackWise technology helps ensure that all
switches are automatically upgraded when the master switch receives a new software version. Automatic
software version checking and updating help ensure that all stack members have the same software version.
●
Autonegotiation on all ports automatically selects half- or full-duplex transmission mode to optimize
bandwidth.
●
Dynamic Trunking Protocol (DTP) facilitates dynamic trunk configuration across all switch ports.
●
Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel
®
groups or Gigabit
EtherChannel groups to link to another switch, router, or server.
To Next Page
Loading...
Need help?
General