Cisco Catalyst 3750 - Connect the Stackwise Cables

To Next Page

To Previous Page

Connect the StackWise Cables

Follow these steps to connect the StackWise cable to the StackWise ports:

Caution Removing and installing the StackWise cable can shorten its useful life. Do not remove

and insert the cable more often than is absolutely necessary.

Note Always use a Cisco-approved StackWise cable to connect the switches.

Step 1

Remove the dust covers from the StackWise cables and StackWise ports, and store

them for future use.

Step 2

Insert one end of the

StackWise cable into the

StackWise port on the back

of the switch.

Step 3

Use the window in the StackWise cable to align the connector correctly. Secure the

screws tightly.

Step 4

Insert the other end of the cable into the connector of the other switch, and secure

the screws tightly.

CONSOLE

STACK 1

STACK 2

Other manuals for Cisco Catalyst 3750