Cisco Cat4K NDPP ST 11 March 2014
EDCS-1228241
12
configured destination. BGPv4, EIGRP, EIGRPv6 for IPv6, RIPv2, and OSPFv2 Routing
protocols are used on all of the Catalyst Switch models.
The TOE can optionally connect to an NTP server on its internal network for time
services. In addition, if the Catalyst Switch is to be remotely administered, then the
management station must be connected to an internal network, SSHv2 must be used to
connect to the switch. A syslog server can also be used to store audit records. A remote
authentication server can also be used for centralized authentication. If these servers are
used, they must be attached to the internal (trusted) network. The internal (trusted)
network is meant to be separated effectively from unauthorized individuals and user
traffic; one that is in a controlled environment where implementation of security policies
can be enforced.
The following figure provides a visual depiction of an example TOE deployment.
Figure 1 TOE environment
To Next Page
Loading...
Need help?
General