To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst C9500-40X and is the answer not in the manual?
General| Model | C9500-40X |
|---|---|
| Category | Switch |
| Product Series | Catalyst 9500 |
| Rack Units | 1 RU |
| Stacking | StackWise Virtual |
| Software | Cisco IOS XE |
| DRAM | 16 GB |
| Flash Memory | 16 GB |
| Input Voltage | 100 to 240 VAC |
| Power Consumption | 400W |
| Ports | 40 x 10GE |
| Uplink Ports | 4 x 40G/100G QSFP28 |
| Forwarding Rate | 1, 440 Mpps |
| Dimensions | 1.73 x 17.5 x 21.52 in. (4.4 x 44.5 x 54.7 cm) |
Provides critical safety warnings and precautions for installation.
Outlines essential site preparation and environmental requirements.
Lists the sequential tasks involved in installing the switch.
Explains how to properly connect the system ground for safety.
Covers the process of physically installing the switch.
Details the procedures for mounting the switch in a rack.
Explains how to secure the switch within the rack.
Details the procedure for installing network modules.
Covers the process of installing power supply units.
Provides an overview of the power supply modules and their features.
Details the procedure for installing fan modules.
Introduces the different fan modules and their specifications.
Explains how to install SATA SSD modules.
Method for isolating issues to specific system components.
Steps to identify and diagnose issues during system startup.
Guides for diagnosing and resolving power supply issues.
Procedures for troubleshooting fan tray and fan module problems.
Explains the meaning of the system status LED.
Details the LED indicators for power supply modules.
Describes port LEDs and how to change their display modes.
Describes the LED indicator for fan status.
Guides on configuring the switch via the Web UI.
Instructions for configuring the switch using the Command Line Interface.
Explains how to access the CLI via console port.
