To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst C9500-32C and is the answer not in the manual?
General| Model | C9500-32C |
|---|---|
| Product Series | Catalyst 9500 |
| Switching Capacity | 6.4 Tbps |
| Operating System | Cisco IOS XE |
| Stacking | StackWise Virtual |
| DRAM | 16 GB |
| Flash Memory | 16 GB |
| Weight | 22.05 lbs |
| Jumbo Frame Support | Up to 9216 bytes |
| Ports | 32 x 100G QSFP28 |
| Input Voltage | 100 to 240 VAC |
| MAC Address Table Size | 128, 000 entries |
| Latency | Less than 5 microseconds |
Details the various Cisco Catalyst 9500 series switch models and their base PIDs.
Illustrates and describes the components and ports located on the front panel of the switch.
Details the available console ports (RJ-45, USB mini-Type B, USB-C) for switch connectivity.
Illustrates and describes the components and ports located on the rear panel of the switch.
Details the power supply slots and supported power supply modules for the switch.
Provides critical safety warnings and precautions for installing and operating the switch.
Details environmental requirements for the installation site, including temperature and airflow.
Outlines the sequence of tasks required for the initial installation of the switch.
Details the procedure for connecting the system ground for safety and EMI shielding.
Provides instructions on how to physically install the switch into a rack or other mounting.
Guides the user through the process of mounting the switch in a standard equipment rack.
Explains how to attach the necessary rack-mount brackets to the switch chassis.
Details the process of securing the switch, with brackets attached, into the rack.
Provides instructions for installing power supply modules into the switch chassis.
Explains how to isolate problems to specific system components for efficient troubleshooting.
Provides steps to diagnose and resolve issues related to the power supply.
Offers guidance on diagnosing and resolving problems with the fan tray assembly.
Illustrates and lists the various LEDs on the Cisco Catalyst 9500 series switches.
Explains the meaning of the System LED colors and states for monitoring system health.
Describes the LED indicators for power supply modules, indicating operational status.
Provides guidance on configuring the switch using its web-based user interface.
Explains how to configure the switch using the command-line interface (CLI).
