• between 26.68 inches and 42.63 inches for C9500-32C.
• between 23.48 inches and 39.43 inches for C9500-32QC, C9500-48Y4C AND C9500-24Y4C.
• Ensure you read the Regulatory Compliance and Safety Information (RCSI) before installing the switch.
• Installation in racks other than 19-inch racks requires a bracket kit not included with the switch.
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
unit in the rack.
Statement 1006
Warning
To reduce risk of electric shock and fire, take care when connecting units to the supply circuit so that wiring
is not overloaded.
Statement 1018
Warning
Cisco Catalyst 9500 Series Switches Hardware Installation Guide
42
Installing a Switch
Rack-Mounting
To Next Page
Loading...
Need help?
General