To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst C9500-24X and is the answer not in the manual?
General| Model | C9500-24X |
|---|---|
| Product Type | Switch |
| Port Count | 24 |
| Switching Capacity | 480 Gbps |
| Forwarding Capacity | 360 Mpps |
| Forwarding Rate | 360 Mpps |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| DRAM | 8 GB |
| Flash Memory | 16 GB |
| Input Voltage | 100 to 240 VAC |
| Uplink Ports | 4 x 40G QSFP+ |
| Memory | 8 GB DRAM |
| Ports | 24 x 10 Gigabit Ethernet |
Provides critical safety warnings and precautions for installation and handling.
Outlines essential site requirements for optimal switch performance and longevity.
Lists the sequential tasks required for installing the switch.
Details the process of connecting the system ground for safety and performance.
Provides step-by-step instructions for establishing an earth ground connection.
Describes the procedures and requirements for mounting the switch in a rack.
Guides on how to attach the rack-mount brackets to the switch chassis.
Details the steps for securely mounting the switch into a rack system.
Outlines post-installation steps, including configuration and verification.
Details the procedure for installing a network module into the switch.
Covers overview, installation, connection, and removal of power supply units.
Covers fan module overview, installation, and finding serial numbers.
Covers SSD module overview, installation, and removal procedures.
Strategy for isolating issues to specific system components like power or fan trays.
Method to determine system startup failures by checking LEDs.
Steps to diagnose and resolve power supply related issues.
Procedure to identify and resolve fan tray problems based on LED indicators.
Guidance on what information to provide when contacting support for issues.
Explains the color and state meanings of the system LED for overall status.
Describes the LED indicators for power supply status and failures.
Details how port LEDs display link status, speed, and duplex mode.
Guides on initial switch setup via the Web User Interface.
