To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst C9500-16X and is the answer not in the manual?
General| Model | C9500-16X |
|---|---|
| Rack Units | 1 RU |
| Form Factor | Rack-mountable |
| RAM | 16 GB |
| Flash Memory | 16 GB |
| Operating System | Cisco IOS XE |
| Power Supply | Dual redundant power supplies |
| Fans | Redundant fans |
| Stacking | StackWise Virtual |
| Product Type | Switch |
| Jumbo Frame Support | Supported |
Details different Cisco Catalyst 9500 Series switch models and their base PIDs.
Describes the components and ports located on the front of the switch.
Illustrates port numbering and mapping for standard 9500 Series switches.
Details port numbering and mapping for high-performance 9500 Series models.
Provides critical safety instructions and warnings to follow before installation.
Outlines essential site preparation and environmental conditions for installation.
Discusses temperature considerations for optimal operation and equipment longevity.
Explains air flow requirements and guidelines essential for proper cooling.
Addresses electromagnetic and radio frequency interference concerns.
Discusses system sensitivity to power variations and best practices.
Explains the importance and procedure for establishing a proper system ground.
Provides essential guidelines for working safely with electrical equipment.
Details precautions to prevent Electrostatic Discharge (ESD) damage to components.
Lists the sequence of tasks required for installing the switch.
Details the procedure for connecting the system ground to the switch chassis.
Explains how to attach the grounding cable from the chassis lug to the rack.
Provides essential guidelines and considerations for mounting the switch in a rack.
Details the process of physically securing the switch into the equipment rack.
Provides a step-by-step guide for installing a network module into the switch.
Overview of power supply installation and supported modules.
Detailed steps for physically inserting a power supply into its slot.
Instructions on how to connect the power supply to the AC or DC power source.
Specific steps for connecting the switch to an AC power source.
Specific steps for connecting the switch to a DC power source.
Step-by-step procedure for installing a fan module into the switch.
Provides a procedure for installing an SSD module into the switch.
Approach to isolate issues by comparing system behavior to expected operation.
Step-by-step guide to diagnose and resolve issues related to the power supply.
Provides steps to diagnose and resolve problems with the fan tray assembly.
Guide for setting up and configuring the switch via its Web User Interface.
Guide for setting up and configuring the switch using the Command Line Interface.
