Cisco Catalyst C9500-40X

This table describes the power requirements.
Table 19: Power Requirements
Power Requirements
C9500-12Q115 to 230 VACInput Voltage
C9500-16X
C9500-24Q
C9500-40X
C9500-32C
90 to 264 VAC
C9500-32QC
C9500-48Y4C
C9500-24Y4C
AC Power Cord Specifications
The following table lists the specifications for the AC power cords that are available for the AC-input power
supplies. The table also includes references to power cord illustrations.
• 2000W power supply power cord has an IEC60320/C15 appliance connector at one end.
Figure 66: IEC60320/C15 Appliance Connector
Note
Table 20: AC Power Cords for C9500 Series Switches and C9500 Series High Performance Switches
AC Source Plug TypeLengthCordset RatingPart NumberLocale
Figure 67: CAB-C15-CBN-JP=(Japan)
3.05 m250 VAC, 12 ACAB-C15-CBN-JPJapan
Cisco Catalyst 9500 Series Switches Hardware Installation Guide
99
Technical Specifications
AC Power Cord Specifications