Cisco Catalyst 8500 Series Regulatory Compliance And Safety Information

9
Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series
78-14229-02
Regulatory Standards Compliance
• Direct the flow of cooling air through the chassis
• Protect the backplane from dust
Disposing of the System
Dispose of the system and its components (including batteries) as specified by all national laws and
regulations.
Regulatory Standards Compliance
This section includes the regulatory compliance, safety, and EMC standards. It also lists the warnings
applicable to different countries.
Table 1 lists the regulatory standards compliance specifications.
Table 1 Regulatory Standards Compliance
Specification Description
Regulatory Compliance Products bearing a CE Mark indicate compliance with the
89/336/EEC and 73/23/EEC directives, which include the
following safety and EMC standards in this table.
Safety UL 1950
CAN/CSA-C22.2 No. 950
EN 60950
IEC 60950
TS 001
AS/NZS 3260
IEC 60825-1
IEC 60825-2
EN 60825-1
EN 60825-2
21CFR 1040
EMC FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55022 Class A with UTP cable
CISPR22 Class A with UTP cable
AS/NZS 3548 Class A with UTP cable
VCCI Class A with UTP cable
EN 55022 Class B with FTP cable
CISPR22 Class B with FTP cable
AS/NZS 3548 Class B with FTP cable
VCCI Class B with FTP cable
EN 55024
ETS 300 386
EN 50082-1
EN 61000-3-2
EN 61000-3-3

Cisco Catalyst 8500 Series Specifications

General

Operating System	Cisco IOS XE
Latency	Sub-microsecond
Forwarding Rate	Up to 9 Bpps
Forwarding Capacity	Up to 9 Bpps
Power Supply	AC or DC
Features	Segment Routing, EVPN, VXLAN, MPLS
Redundancy	Power supply
Management	Cisco DNA Center, CLI, SNMP, RESTCONF, NETCONF