Cisco Catalyst 9300 Series Installing

Figure 1: Components Delivered in the Shipping Box
Eight number-8 Phillips flat-head screws9Cisco Catalyst 9300 Series switch with
optional network module
1
(power supply
and fan modules not shown)
1
Cable guide10AC power cord2
M4.0 x 20mm Phillips pan-head screw11Product documentation and compliance
document
3
(Optional) RJ-45 console cable
1
12Four rubber mounting feet4
(Optional) USB console cable
1
13Ground lug screw and ring terminal5
(Optional) StackWise-480/1T cable
(0.5-meter, 1-meter, or 3-meter)
1
14Two 19-inch mounting brackets6
(Optional) StackPower cable (0.3-meter
or 1.5-meter)
1
15Four number-12 pan-head screws7
(Optional) StackWise-320 cable16Four number-10 pan-head screws8
Installing a Switch
2
Installing a Switch
Shipping Box Contents

Cisco Catalyst 9300 Series Specifications

General

Operating System	Cisco IOS XE
Model	Cisco Catalyst 9300 Series
Uplink Interfaces	10G, 25G, 40G
Downlink Interfaces	1G
Stacking Bandwidth	480 Gbps
Power Supply	Redundant power supplies
PoE	UPOE
Port Density	Up to 48 ports
Power over Ethernet (PoE)	UPOE, UPOE+
Security Features	MACsec
Management	Cisco DNA Center, CLI, SNMP
Redundancy	Stacking, redundant power supplies, hot-swappable fans