Cable-management bracket screw2
Use the package of screws that came with your chassis containing four screws.
Note
The following figure shows where to attach the cable-management brackets to the .
Figure 7: Attaching the Cable-Management Brackets to the
Chassis front rack-mount bracket3Cable-management bracket "U" feature1
Cable-management bracket screw holes2
Step 3 Insert the cable management screw into the screw hole of the cable-management bracket and into the chassis rack-mount
bracket and tighten the screw using a Philips screwdriver.
Step 4 Repeat step 1 to step 3 for the other side of the chassis.
Installing the Controller
11
Installing the Controller
Attaching the Cable Management Bracket
To Next Page
Loading...
