EasyManuals Logo

Cisco Catalyst C9300-24U User Manual

Cisco Catalyst C9300-24U
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
Power Requirements
PWR-C1-715WDCSpecification
24–12 AInput current
-56 V at 12.8 AOutput ratings
–36 VDC (minimum), –48 VDC (nominal), –72 VDC
(maximum)
Input voltage range domestic
–36 VDC (minimum), –48 VDC (nominal), –72 VDC
(maximum)
Voltage range international
PWR-C1-715WDC: 2777 BTUs per hour, 715 WTotal input BTU
8
2440 BTUs per hourTotal output BTU
12 AWG or 8 AWGWire gauge for ground connection
20 ABranch circuit protection
8
The total input and total output BTU ratings refer to input power to the power supply and output power
to the switch. The BTU ratings are based on -40 VDC.
Table 45: Fan Module Environmental and Physical Specifications
Environmental Ranges
23 to 176°F (–5 to 80°C)
Operating temperature
–40 to 185°F (–40 to 85°C) up to 15,000 ft (4500 m)Storage temperature
5 to 95% (non-condensing)Relative humidity
Up to 13,000 ft (4000 m)Altitude
Physical Specification
1.62 x 1.73 x 4.24 in. (4.11 x 4.39 x 10.76 cm)
Dimensions (H x D x W)
0.48 lb (0.21 kg)Weight (for three fans)
Operating Specification
20 cfm
Airflow
AC Power Cord Specifications
The following table lists the specifications for the AC power cords that are available for the AC-input power
supplies.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
118
Technical Specifications
AC Power Cord Specifications

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst C9300-24U and is the answer not in the manual?

Cisco Catalyst C9300-24U Specifications

General IconGeneral
ModelC9300-24U
Device TypeSwitch
Enclosure TypeRack-mountable
DRAM8 GB
Flash16 GB
Stacking Bandwidth480 Gbps
Max Stacking Number8
PoE Budget1440W
MAC Address Table Size32, 000 entries
Power RedundancyYes
Uplink Interfaces4 x 10G SFP+
Routing ProtocolOSPF, EIGRP, BGP, IS-IS, RIP
Remote Management ProtocolSNMP, CLI, HTTP, HTTPS, SSH, Telnet
FeaturesQuality of Service (QoS), Access Control List (ACL), VLAN
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad, IEEE 802.1x
Dimensions17.5 in x 17.5 in x 1.7 in
Operating Temperature0 to 45°C
Ports24 x 10/100/1000 (UPOE)
Weight14.99 lbs

Related product manuals