Cisco Catalyst Wireless 9166D1 Series User Manual

DescriptionMounting Brackets
Articulating wall/pole mount kit. This kit should be used along
with AIR-AP-BRACKET-2
CW-MNT-ART2-00
For low-profile non-pivoting installationsAIR-AP-BRACKET-1=
Flush ceiling grid clipAIR-AP-T-RAIL-F=
Recessed ceiling grid clipAIR-AP-T-RAIL-R=
T-RAIL channel adapterAIR-CHNL-ADAPTER=
• Power injectors when Power over Ethernet (PoE) is not available
DescriptionPower Supply
Mid-span power injector AIR-PWRINJ7= when (PoE) is not
available
Power specifications: 50W, 56VDC
For more information, see the power injector data sheet.
AIR-PWRINJ7=
A 802.3at power injector when PoE is not available
Power Specifications: 30W, 55VDC
For more information, see the power injector data sheet.
AIR-PWRINJ6=
Meraki 802.3bt PoE injector
Power Specifications: 60W, 55VDC
For more information, see the power injector data sheet.
MA-INJ-6-x
Cisco Catalyst Wireless 9166D1 Wi-Fi 6E Access Point Hardware Installation Guide
16
Unpacking Your Access Point
Cisco Orderable Accessories

Cisco Catalyst Wireless 9166D1 Series Specifications

General

Brand	Cisco
Model	Catalyst Wireless 9166D1 Series
Category	Wireless Access Point
Language	English