interface TenGigabitEthernet4/1/7,
interface TenGigabitEthernet5/1/0,
interface TenGigabitEthernet5/1/1,
interface TenGigabitEthernet5/1/2,
interface TenGigabitEthernet5/1/3,
interface TenGigabitEthernet5/1/4,
interface TenGigabitEthernet5/1/5,
interface TenGigabitEthernet5/1/6,
interface TenGigabitEthernet5/1/7,
d) Add HundredGigE interfaces configuration based on the network topology, for example:
interface HundredGigE4/1/0
mtu 2000
no ip address
load-interval 30
plim qos input map ip dscp-based
plim qos input map ip dscp 40 queue strict-priority
plim qos input map mpls exp 5 queue strict-priority
cdp enable
service-policy output parent-egress-to-core
channel-group 10 mode active
end
interface HundredGigE4/1/1
mtu 2000
no ip address
load-interval 30
plim qos input map ip dscp-based
plim qos input map ip dscp 40 queue strict-priority
plim qos input map mpls exp 5 queue strict-priority
cdp enable
service-policy output parent-egress-to-core
channel-group 11 mode active
end
interface HundredGigE5/1/0
mtu 2000
no ip address
load-interval 30
plim qos input map ip dscp-based
plim qos input map ip dscp 40 queue strict-priority
plim qos input map mpls exp 5 queue strict-priority
cdp enable
service-policy output parent-egress-to-core
channel-group 10 mode active
end
interface HundredGigE5/1/1
mtu 2000
no ip address
load-interval 30
plim qos input map ip dscp-based
plim qos input map ip dscp 40 queue strict-priority
plim qos input map mpls exp 5 queue strict-priority
cdp enable
service-policy output parent-egress-to-core
channel-group 11 mode active
end
Cisco Converged Broadband Routers Hardware Installation Guide
35
Installing the Supervisor in the Cisco cBR Chassis
Upgrade Supervisor 160G to Supervisor 250G 100GE Mode
To Next Page
Loading...
Need help?
General
