A-2
Cisco 7201 Installation and Configuration Guide
OL-11364-04
Appendix A Specifications
Power Supply Product Numbers
Power Supply Product Numbers
Dual AC Power Supply Information (continued)
AC-input voltage rating 100–240 VAC
2
AC-input current rating 2A
3
maximum
AC-input current (typical) 0.85A at 100 VAC
0.35A at 240 VAC
AC-input frequency rating 50 to 60 Hz
4
AC-input cable Use only Cisco Agency-approved power cords
Dual DC Power Supply Information
DC-input power 150W maximum
DC- input power (typical) 85W
DC-input nominal voltage rating –48 VDC
5
to –60 VDC
DC-rated input voltage –40 VDC to –72 VDC
DC-input current rating 6A maximum
DC-input current (typical) 1.8A at –48 VDC, 1.4A at –60 VDC
DC-input cable 16-AWG
6
(1.0 mm2) or 18-AWG (0.75 mm2) wire with a circuit breaker rating of 20A
maximum. The ground wire must be at least as large as the supply wires.
1. BTU = British thermal units
2. VAC = volts alternating current
3. A = amperes
4. Hz = hertz
5. VDC = volts direct current
6. AWG = American Wire Gauge
Ta ble A-2 Power Supply Product Numbers
Power Supply Product Number
AC power supply PWR-7201-AC=
1
1. This product number provides a single AC power supply.
DC power supply PWR-7201-DC=
2
2. This product number provides a single DC power supply.
Table A-1 Cisco 7201 Router Specifications (continued)
Description Specification
To Next Page
Loading...
