Cisco CISCO7201 - Page 163

Index
IN-5
Cisco 7201 Installation and Configuration Guide
OL-11364-04
L
LEDs 1-4
ALARM 1-4
CF ACTV (CompactFlash Active) 1-4
EN (enable) 1-4
enabled on interface processors 3-9
FE (Fast Ethernet Management port) 1-4
identification and status 5-2
LINK/ACTV (activity) 1-4
native I/O ports 5-3
PWR (power) OK 1-4
STATUS 1-4
USB 1-4
using for troubleshooting
native I/O ports 5-3
port adapter 5-4
line con 0 command 3-28
LINK/ACTV (activity) LED 1-4
M
MAC address 3-3
make dir command B-10
management port, Fast Ethernet 1-2, 1-3
media-type command 3-15, 5-7
memory, cache 1-10
messages
environmental 3-6
mkdir command B-10
mode-conditioning patch cord description 2-21, A-6
modifications to configuration, reviewing 3-21
N
native Gigabit Ethernet cables 2-18
native Gigabit Ethernet interface, configuring 3-15
native I/O ports, LEDs 5-3
negotiation auto command 3-16
no negotiation auto command 3-16
nonvolatile random-access memory
See NVRAM
normal status level
environmental monitor 3-6
no shutdown command 3-28
numbering
logical interface 3-2
port adapter slot 3-2
NVRAM
log 3-5
saving and viewing contents 3-21
O
online insertion and removal
see OIR 3-4
optical connections cleaning information 1-5
options, Cisco 7201 1-3
out-of-tolerance voltage condition 3-5
overheating
at startup 5-3
damage 3-4
monitoring 3-5
P
password
command 3-28
recovering lost 3-26
pinouts, RJ-45 A-6
pinouts for the RJ-45 to DB-25 adapters 2-15
plug, SFP module 4-3
port adapter
connecting cables 2-14
documentation i-xvii
logical interface numbering 3-2
slot numbering 3-2