Cisco CIVS-IPC-5010 User Manual

CHAPTER
1-1
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
OL-22669-02
1
Introduction
The 5010/5011 cameras are fixed network dome cameras with a built-in Web-based viewer for live
streaming to a standard Web browser (Microsoft Internet Explorer 8).
The cameras support standard H.264 and MJPEG compression formats and dual video streams that can
be configured for a variety of resolutions, frame rates, and bit rates.
Each camera also includes a 2.8 - 8mm Varifocal Megapixel lens, a ready-to-install indoor enclosure,
and a mechanical IR cut filter for increased low-light sensitivity. Additional lenses are available, and the
cameras accept a wide range of megapixel varifocal CS-mount lenses.
The cameras also include built-in Power over Ethernet (PoE), which supplies power to the camera
through the network. If PoE is not available, the camera is prewired for 24 VAC.
Models
Getting Started
Before installing your network camera, thoroughly familiarize yourself with the information in this
section of the manual.
Note • Do not use a network hub when configuring the network settings for the camera.
• To ensure secure access to the network camera, place the camera behind a firewall when it is
connected to a network.
CIVS-IPC-5010 Indoor fixed dome network camera, 2.1 megapixel, day/night, and a
2.8 ~ 8 mm varifocal megapixel lens. This camera has a clear dome.
CIVS-IPC-5011 Indoor fixed dome network camera, 2.1 megapixel, day/night, and a
2.8 ~ 8 mm varifocal megapixel lens. This camera has a smoked dome.

Cisco CIVS-IPC-5010 Specifications

General

Resolution	1280 x 720
Frame Rate	30 fps
Lens	3.6 mm
Lens Type	Fixed
IR Distance	30 m
Ethernet	10/100 Mbps
Operating Temperature	-10°C to 50°C
Ingress Protection	IP66
Video Compression	H.264
Audio Compression	G.711
Protocols	HTTP, HTTPS, TCP/IP, DHCP, DNS, NTP, RTSP, RTP
Power	12 VDC
Power over Ethernet	Yes
Dimensions	110 mm

Summary

Chapter 1 Introduction

Models

Details specific camera models, including CIVS-IPC-5010 and CIVS-IPC-5011.

Getting Started

Provides initial setup guidance and important notes before camera installation.

Parts List

Lists the components included in the camera's shipping box.

Camera Connections and Features

Describes the camera's ports and physical features, including side and top views.

Product Label

Explains the location and information found on the product label.