Cisco Meraki MV12 User Manual

!
1
MV12 Installation Guide
MV12 Overview
The Cisco Meraki MV12 is a wireless networked camera that is exceptionally simple to deploy and
configure due to its integration into the Meraki dashboard and the use of cloud augmented edge storage.
The MV family eliminates the complex and costly servers and video recorders required by traditional
solutions which removes the limitations typically placed on video surveillance deployments.
Package Contents
In addition to the MV camera, the following are provided:
Ethernet Ports
The MV12 features one LAN RJ45 port. This port is used for two purposes. One function is to be an
uplink to access Meraki’s Dashboard. The secondary function is to accept 802.3af power over Ethernet
(PoE) via an injector or Switch.
Power Options
The MV12 can be powered using a Meraki MA-INJ-4 PoE injector (optional accessory) or using a PoE
switch.

Cisco Meraki MV12 Specifications

General

Audio	Two-way audio
Sensor Type	CMOS
Video Compression	H.264
Frame Rate	30 fps
Ingress Protection	IP67
Camera Type	Dome
Resolution	1080p
Night Vision	Yes
Storage	Cloud storage
Connectivity	Ethernet
Wireless	802.11ac
Power	PoE or 802.3af
Lens	Fixed
Power Method	12V DC or 802.3af PoE
Mounting	Ceiling or wall
Warranty	Lifetime
Weight	500 g (1.1 lbs)

Summary

MV12 Overview

Package Contents

Ethernet Ports

Power Options

Pre-Install Preparation

Configure your MV12 in the Networking using Dashboard

Check and Configure Firewall Settings

DNS Configuration

Assigning IP Addresses

Installation Instructions

Wall Mounting Instructions

Provides step-by-step instructions for mounting the MV12 camera using the wall mount.