Need help?Do you have a question about the Cisco WVC80N and is the answer not in the manual?
General| Resolution | 640 x 480 |
|---|---|
| Wireless Standard | 802.11b/g |
| Wireless Standards | 802.11b/g |
| Audio | Two-way audio |
| Connectivity | Wireless |
| Image Sensor Type | CMOS |
| Night Vision | Yes |
| Security | WEP, WPA, WPA2 |
| Motion Detection | Yes |
| Remote Viewing | Yes |
| Camera Type | Network Camera |
| Type | IP Camera |
| Video Compression | MJPEG |
| Power Supply | DC 5V |
| Viewing Angle | 50 degrees |
| Wireless Protocol | 802.11b/g |
| Operating Temperature | 0 to 40 °C |
| Weight | 0.09 kg (0.2 lb) |
Step-by-step guide to install the software utility.
Initial setup and configuration of the camera utility.
Configuring recording schedules for the camera.
Methods to access the camera's web interface.
Steps to view the camera's live video feed.
Configuration for image and video quality.
Covers options like microphone, timestamp, and admin settings.
Covers user access and network configuration like DDNS, UPnP.
Setting up motion detection areas and schedules.
General troubleshooting for common issues.
Addresses issues like slow video, access denial, and duplicate listings.
Covers FW version, reboot, defaults, and group parameters.
Details commands for managing system date/time and firmware.
Commands for downloading and uploading configuration.
Commands to download logs and manage motion detection.
Commands to configure motion detection settings.
Commands for surveying network shares.
Commands for managing shared folders on network servers.
To Next Page
