Cisco WVC80N - CGI Commands for Configuration Management

Appendix D
CGI Commands
33
Wireless-N Internet Home Monitoring Camera
Parameter Value and description
group
1. To get all group settings
group_name (The group name is not case sensitive.)
2. To get a specific setting from a group
group_name.parameter_name
3. To get the settings from multiple groups
group_name&group_name...
Return: All group settings or one group setting is returned as follows:
HTTP/1.0 200 OK\r\n
…
content-type: text/plain\r\n
...
\r\n
[group1]\r\n
<parameter pair>\r\n
<parameter pair>\r\n
...\r\n
[group2]\r\n
<parameter pair>\r\n
<parameter pair>\r\n
...\r\n
Where <parameter pair> is <parameter_name>=<parameter_value>.
Set Group Parameters
Method: GET
URL: http://<ip>/adm/set_group.cgi?<parameter>=<value>[&<parameter pair>…]
Parameter Value and description
group Group name is specified here. (The group name is not case sensitive.)
Return: A successful request returns all group parameters or the specified parameters as below:
HTTP/1.0 200 OK\r\n
…
content-type: text/plain\r\n
...
\r\n
OK\r\n