Chapter 3
Advanced Configuration with the Web-based Utility
21
Wireless-N Internet Home Monitoring Camera
Browse Click Browse to select the Samba server where
your video files will be saved. Browse to the location
where you wish to save your video files and click Apply.
Browse
Samba Server This displays the address of your Samba
server.
Upload Path This displays the upload path to your Samba
server. Your saved video files are found in this directory.
User Name Enter your Samba server user name here.
Password Enter your Samba server password here.
File Name Prefix The contents of this field are added as
a prefix to each of the saved video filenames. The default
value is record.
Maximum Duration Select the number of minutes of
video each saved recording file will contain. This value
must be between 1 and 120 minutes. The default value
is 10.
Enable adding timestamp to files Check this box to
enable adding a timestamp to the end of your saved video
files. The format is yy:mm:dd:hh:mm.
Start Recording now/Define Recording Schedule To
enable immediate recording, select Start Recording now.
To enable scheduled recording, select Define Recording
Schedule. Specify the start and end times using the
dropdown menus in the Start at and Stop at fields.
Setup > Status
The Setup > Status screen allows you to view the Camera’s
status information and log.
Setup > Status
System Status
Firmware Version The version of the current firmware
installed.
MAC Address The MAC Address of the Camera is
displayed here.
Camera Name The name you gave to the Camera is
displayed here.
Description Information about the Camera, such as
location, is displayed here.
Date/Time The current date and time are shown here.
Network
Network Type The wireless network’s mode is shown
here.
IP Version The IP version in use is displayed here.
IP Address The Camera’s IP Address is displayed here.
Subnet Mask The Camera’s Subnet Mask is shown here.
Gateway The Camera’s Gateway address is displayed
here.
Wireless
SSID The wireless network’s SSID or name is shown here.
Domain The wireless network’s region is displayed here.
Channel No The wireless network’s channel setting is
displayed here.
Security The wireless network’s encryption level is
displayed here.
To Next Page
Loading...
Need help?
General
