EasyManua.ls Logo

Cisco PVC2300 User Manual

Cisco PVC2300
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cisco Small Business
PVC2300 and WVC2300 Internet Video Cameras with
Audio
ADMINISTRATION
GUIDE

Table of Contents

Other manuals for Cisco PVC2300

Question and Answer IconNeed help?

Do you have a question about the Cisco PVC2300 and is the answer not in the manual?

Cisco PVC2300 Specifications

General IconGeneral
ModelPVC2300
CategorySecurity Camera
Maximum Resolution640 x 480
Day/NightYes
Frame Rate30 fps
Image Sensor1/4 inch CMOS
Minimum Illumination0.5 Lux
Video CompressionMJPEG
ConnectivityEthernet
Ethernet10/100 Mbps
PowerPower over Ethernet
Power Supply12V DC
Operating Temperature0 to 50°C (32 to 122°F)
FeaturesMotion detection

Summary

Introduction to Cisco Small Business Video Cameras

Minimum System Requirements

Specifies the PC hardware and software requirements for camera operation.

Camera Lens Options

Lists compatible CS-mount lenses and their specifications for the cameras.

Planning Your Wireless Network

Wireless Network Security Tips

Provides advice on securing wireless networks against threats and intrusions.

Wireless Network Security Threats

Details common security threats to wireless networks and how to mitigate them.

Getting to Know the Cisco Cameras

Front Panel Components

Describes the LEDs, lens, and built-in microphone located on the camera's front.

Back Panel Ports and Features

Details ports like Ethernet, power, GPIO, and buttons on the camera's back panel.

Connecting and Installing the Cisco Cameras

Camera Hardware Installation

Step-by-step guide for physically installing the camera and its stand.

Adjusting Camera Lens Focus

Instructions on how to adjust the camera lens focus for optimal image clarity.

Installing Cisco Camera Software

Basic Camera and Network Configuration

Guides users through initial setup using the Setup Wizard for network and camera settings.

WVC2300 Wireless Network Setup

Details the procedure for configuring the WVC2300 camera for wireless network connectivity.

Using the Web-Based Configuration Utility

Launching the Configuration Utility

Steps to access the camera's web interface for configuration and management.

Home Window Functions

Overview of the Home window, including live video viewing and output controls.

Configuring Cisco Cameras

Basic Camera Setup and Network Settings

Configure essential device settings like name, description, date/time, and network parameters.

Advanced Setup Configuration

Advanced settings for HTTP/HTTPS, RTP/RTSP, UPnP, Bonjour, QoS, and CoS.

Motion Detection Configuration

Set up motion detection areas and adjust sensitivity for event triggers.

Network Status and Information

View network status including IP address, subnet mask, gateway, and DNS servers.

Sample Camera Configurations

Configuring Email Alerts

Set up email notifications to be sent when specific events are detected.

Port Forwarding Setup

Configure port forwarding rules on the router for remote camera access.

WVC2300 Wireless Security Precautions

Essential security measures for the WVC2300 wireless camera.

Troubleshooting Cisco Video Cameras

Common Questions and Answers

Solutions for common issues encountered during camera installation and operation.

Cisco Camera Specifications

PVC2300 Camera Specifications

Detailed technical specifications for the PVC2300 model.

WVC2300 Camera Specifications

Detailed technical specifications for the WVC2300 model.

I/O Port Pin Specifications

Pinout and function details for the camera's Input/Output ports.

Where to Go From Here

Related product manuals