Cisco PVC2300 - Secondary SMTP

Configuring the PVC2300 and WVC2300 Cameras
Applications > Mail
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 84
8
• Authentication—From the drop-down list, choose one of the following
options:
- Not Required—Authentication is not required to send mail.
- Requires SMTP Authentication—Select if the SMTP server requires a
login to send mail.
- Requires POP before SMTP—Select if the SMTP server requires a
POP login to send mail.
• Account Name—Enter the account name to be used on the e-mail server.
• Password—Enter the password associated with the account name.
• POP Server Name—Enter the hostname or IP address of the POP3 mail
server that is being used to receive e-mail.
• Test SMTP S er ver—Click to test the configuration. You will get an error
message if the transaction does not complete. For example, test fails due to
a wrong username or password.
• Requires SSL Encryption—Check the check box if your mail server
requires SSL encryption. This option supports cryptographic protocols that
provide security and data integrity for communications over TCP/IP
networks such as the Internet.
Secondary SMTP
• Secondary SMTP— (Optional) Check the box to upload to the secondary
SMTP server if the camera cannot connect to the primary SMTP server.
• SMTP Mail Server—Enter the address of the Simple Mail Transport
Protocol (SMTP) server to be used to send e-mail. You can use the IP
address or the domain name.
• Port—Enter the port number for the mail server. The default is 25.
• Authentication—From the drop-down list, choose one of the following
options:
- Not Required—Authentication is not required to send mail.
- Requires SMTP Authentication—Select if the SMTP server requires a
login to send mail.
- Requires POP before SMTP — Select this if the SMTP Server requires
a POP login to send mail.