Configuring the PVC2300 and WVC2300 Cameras
Applications > FTP
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 87
8
• Password—Enter the password associated with the login name for the
primary FTP server.
• File Path Name—Enter the desired file path name on the primary FTP
server.
• Enable Passive Mode—Check the box to enable the passive mode feature.
Passive mode is a more secure form of data transfer. The use of passive
FTP ensures all data flow initiation comes from inside the network rather
than from the outside.
Secondary FTP
• Secondary FTP—Check the check box to enable. When enabled, the
camera will connect to a secondary FTP server if the primary FTP server is
not available
• FTP Server—Enter the address of the secondary FTP server.
• Port—Enter the port number for the secondary FTP server. The default is
21.
• Login Name—Enter the login name associated with the secondary FTP
server.
• Password—Enter the password associated with the login name for the
secondary FTP server.
• File Path Name—Enter the desired file path name on the secondary FTP
server.
• Enable Passive Mode—Check the box to enable the passive mode feature
on the secondary FTP server. Passive mode is a more secure form of data
transfer. The use of passive FTP ensures all data flow initiation comes from
inside the network rather than from the outside.
To Next Page
Loading...
