Cisco PVC2300 - Applications > SMB;CIFS

Configuring the PVC2300 and WVC2300 Cameras
Applications > SMB/CIFS
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 102
8
• Pan Speed—Select the desired speed for camera panning.
• Tilt Speed—Select the desired speed for camera tilting.
STEP 4 Click Add to add to the preset list or Back to return to the previous screen.
Applications > SMB/CIFS
The Applications > SMB/CIFS window shows options for SMB/CIFS. SMB/CIFS
allows the camera to record directly into a Network Attached Storage (NAS)
device. There is no need to record to a computer and keep a computer active all
the time.
• Enable SMB/CIFS Recording—When enabled, provides seamless file
recording and uploading to a NAS device. The TCP/IP protocol installed on
the NAS device is used for file transfer.
• SMB/CIFS Server—Enter the server hostname or IP address of your NAS
device (SMB/CIFS server).
• Upload Path—Enter the folder name to upload video to the NAS device
(SMB/CIFS server).
• Login Name—Enter user’s login name for the NAS device (SMB/CIFS
server).
• Password—Enter user’s password for the NAS device (SMB/CIFS server).
• Maximum Size of Each File (MB)—Enter the maximum file size to upload to
the NAS device (SMB/CIFS server).
• Enable adding timestamp to files—When enabled, a timestamp is added
to each recorded file and there will be multiple recorded files. Older files
will not be over-written, so the size of your recording will continuously grow.
If disabled, first video image is timestamped; any images saved thereafter
are not timestamped.