Cisco WVC80N - CGI Commands for Snapshot, SDP, and RTP;RTSP Streaming

Appendix D
CGI Commands
29
Wireless-N Internet Home Monitoring Camera
Snapshot
Method: GET
URL: http://<ip>/img/snapshot.cgi?[size=<value>][&quality=<value>]
Parameter Value and description
size
Image resolution
1: 160x120
2: 320x240
3: 640x480
quality
Quality level
1: Very high
2: High
3: Normal
4: Low
5: Very low
Snapshot (continued)
Example 1: To snapshot a 640x480 very high quality JPEG image from network Camera 192.168.0.99,
http://192.168.0.99/img/snapshot.cgi?size=3&quality=1
Example 2: To snapshot a JPEG image from network Camera 192.168.0.99 (with current resolution and quality),
http://192.168.0.99/img/snapshot.cgi
Example 3: To snapshot a low quality JPEG image with current resolution from the network Camera 192.168.0.99,
http://192.168.0.99/img/snapshot.cgi?quality=4
Return: A JPEG image is returned to the client with the user specified resolution and quality.
HTTP/1.0 200 OK\r\n
…
content-type: image/jpeg\r\n
…
<JPEG image data>
SDP (MPEG-4 video only, not for MJPEG video)
Method: GET
URL: http://<ip>/img/media.sdp
Return: A SDP file is returned.
HTTP/1.0 200 OK\r\n
…
<SDP data>
RTP/RTSP (MPEG-4 video only, not for MJPEG video)
The user can stream video and audio through the following URLs.
Video and audio: rtsp://<ip>/img/media.sav
Video only: rtsp://<ip>/img/video.sav
Audio only: rtsp://<ip>/img/audio.sav