Contents
iv
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
OL-13478-03
Intended Uses 2-8
If AC Power Supplies Are Installed 2-8
If DC Power Supplies Are Installed 2-9
Temperature and Ventilation 2-10
CHAPTER
3 Installing the Content Delivery Engines 3-1
Server Types 3-1
Tools and Parts Required 3-2
Unpacking the Box 3-2
Verifying Contents 3-3
Inspecting for Damage 3-3
Installing the CDEs 3-3
Reviewing Rack Installation Safety Guidelines 3-3
Preparing the CDEs for Rack Installation 3-4
Installing CDEs in the Rack 3-5
Making Physical Connections 3-5
Connecting Power Cords 3-6
Connecting Network Cables 3-8
Installing or Removing Disk Drives 3-9
CHAPTER
4 Installing the Internet Streamer CDS Software and Initially Configuring a CDE 4-1
Before You Begin 4-1
Installation and Configuration Order 4-2
Running the BIOS Setup Utility 4-2
Running the BIOS Setup Utility for the CDE100 4-3
Running the BIOS Setup Utility for the CDE200 4-9
Installing the Software 4-13
Initially Configuring a CDE 4-14
Assigning the Primary Interface 4-14
Running the Setup Utility 4-15
Verifying the CDSM 4-15
CHAPTER
5 Hardware Troubleshooting 5-1
Troubleshooting Ethernet Adapters 5-1
Troubleshooting SATA Drives 5-2
To Next Page
Loading...
