44 4024320 Rev A
How Do I Configure My DOCSIS Residential Gateway?
Saving Your Configuration
Use the Setup Basic Settings - Save RG Configuration to Local PC page to save your
current cable modem RG configuration to the hard drive on your PC or to a floppy
disk. You will then be able to restore the RG configuration, if necessary.
Note: If you are not familiar with the procedures detailed in this section, contact
your service provider before you attempt to change any of the residential gateway
default settings.
Click Save Configuration to your PC in the Basic Settings section of the Setup page
to access the Setup Basic Settings - Save RG Configuration to Local PC page.
Setup Basic Settings - Save RG Configuration to Local PC Page
The following illustration is an example of the Setup Basic Settings - Save RG
Configuration to Local PC page.
To Save your current setting to your computer, click the floppy disk icon in the
lower portion of the screen. You will be prompted to provide a file name and
location for the backup configuration file.
To Restore your setting, click Browse and select the backup configuration file name
that you saved on your PC. The path and filename of the backup configuration
appears in the File Name field. Then, click Download to restore your configuration
file. A Download Success message appears when the restore is complete.
To Next Page
Loading...
Need help?
General
