26 Part Number 4021203 Rev A
How Do I Connect the Cable Modem for Internet and Telephone Service?
7 Plug in and power on your PC and other home network devices. The LINK LED
on the cable modem corresponding to the connected devices should be on or
blinking.
8 Once the cable modem is online, most Internet devices will have immediate
Internet access.
Note: If your PC does not have Internet access, refer to Frequently Asked
Questions
(on page 29) for information on how to configure your PC for TCP/IP.
For Internet devices other than PCs, refer to the DHCP or IP Address
configuration section of the User Guide or Operations Manual for those devices.
To Next Page
Loading...
Need help?
General
