Cisco EPC3825 User Manual

34 4021196 Rev A
How Do I Configure My DOCSIS Residential Gateway?
Section Field Description
Disabling DDNS (Factory Default Settings)
To disable DDNS, select Disabled from the drop-down list and click Save
Settings.
DDNS
Service
Enabling DDNS
Note: In order to use the DDNS feature, you must first set up an account and
establish a URL with www.DynDNS.org. The DDNS feature will not work
without a valid account.
To set up a DDNS account, open your browser and enter www.DynDNS.org
in the address bar. Follow the instructions on the website to set up an account.
To enable DDNS, follow these steps.
1 On the DDNS page, select www.DynDNS.org as your DDNS server.
2 Configure the following fields:
 User Name
 Password
 Host Name
3 Click Save Settings. The device will now advise the DDNS service of your
current WAN (Internet) IP address whenever this address changes.
Important: The Status area of the window will display the status of the
DDNS service connection.

Cisco EPC3825 Specifications

General

Model	EPC3825
Category	Gateway
DOCSIS	3.0
Downstream Channels	8
Upstream Channels	4
Wireless Standard	802.11b/g/n
Ethernet Ports	4
Telephony Ports	2
Max Upstream Speed	120 Mbps
Wireless Speed	Up to 300 Mbps
Ethernet Port Speed	10/100/1000 Mbps
USB Ports	1
Security Features	WPA, WPA2