Cisco EPC3925 User Manual

32 4021192 Rev B
How Do I Configure My DOCSIS Residential Gateway?
Configuring Quick Settings
Use the descriptions and instructions in the following table to configure the network
settings for the device. After you make your selections, click Save Settings to apply
your changes or click Cancel Changes to cancel.
Section
Field Description
Change Password
User Name
Displays the user name for the operator currently logged in
Change Password to
Allows you to change your password
Re-Enter New Password
Allows you to re-enter the new password. You must enter the same
password as the one entered in the field Change Password to

Cisco EPC3925 Specifications

General

Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Wi-Fi	Yes
Modulation	128-QAM, 16-QAM, 32-QAM, 64-QAM, 8-QAM, QPSK
Frequency band	2.4 GHz
Networking standards	IEEE 802.11n
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	4
Input current	1.5 A
Input voltage	15 V
Input frequency	50/60 Hz
Power requirements	230 VAC
Power consumption (typical)	17 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Voice codecs	G.711, G.723, G.726, G.728, G.729, G.729A

Weight and Dimensions

Weight	430 g
Dimensions (WxDxH)	176 x 145 x 45 mm