Cisco Expressway CE1000 Appliance - Specific Issues

2 Slot 2: used for RAIDcard
3 Slot 1: used for dual 1/10Gb network adapter (LAN1 and
LAN2)
4 VGA video connector
5 Serial port (RJ-45 connector)
6 10/100/1000 Ethernet dedicated management port (used for
CIMC)
7 Dual 1-Gb Ethernet ports (not currently in use)
8 USB ports
9 Rear Identification button/LED
Definitions of LEDstates
For the definitions of LEDstates see http://www.cisco.com/en/US/docs/unified_
computing/ucs/c/hw/C220/install/replace.html#wp1167104.
Specific issues
Active Options only indicates ‘150 traversal calls’ for Large deployments
To utilize the Large scale capabilities (500 traversal calls) of the Cisco Expressway, the CE1000 unit must
have an active 10Gb network connection.
Cisco Expressway CE1000 Appliance Installation Guide (8.5) Page 13 of 16
Troubleshooting