Cisco Firepower 1000 - Page 2

Reimage the Firepower 1000 or 2100 Series
The Firepower 1000 and 2100 series support either FTD or ASA software.
• Download Software, on page 2
• ASA→FTD: Firepower 1000 or 2100 Appliance Mode, on page 3
• ASA→FTD: Firepower 2100 Platform Mode, on page 6
• FTD→ASA: Firepower 1000 or 2100, on page 9
• FTD→FTD: Firepower 1000 or 2100, on page 12
Download Software
Obtain FTD software or ASA software. The procedures in this document require you to put software on a
TFTP server for the initial download. Other images can be other server types, such as HTTP
or FTP. For the exact software package and server type, see the procedures.
A Cisco.com login and Cisco service contract are required.
Note
Table 1: Firepower Threat Defense Software
PackagesDownload LocationFTD Model
See:
https://www.cisco.com/go/ftd-software
Firepower 1000 series
The package has a filename like
cisco-ftd-fp1k.6.4.0.SPA.
FTD package
Choose your model > Firepower Threat
Defense Software > version.
See:
https://www.cisco.com/go/ftd-software
Firepower 2100 series
The package has a filename like
cisco-ftd-fp2k.6.2.2.SPA.
FTD package
Choose your model > Firepower Threat
Defense Software > version.
Cisco ASA and Firepower Threat Defense Reimage Guide
2
Cisco ASA and Firepower Threat Defense Reimage Guide
Reimage the Firepower 1000 or 2100 Series