Cisco Firepower 1000 - Page 7

• scp://username@server/[path/]image_name
• sftp://username@server/[path/]image_name
• tftp://server[:port]/[path/]image_name
• usbA:/path/filename
Example:
firepower-2110 /firmware # download image
scp://admin@10.88.29.181/cisco-ftd-fp2k.6.3.0-1.SPA
Password:
Please use the command 'show download-task' or 'show download-task detail' to check
download progress.
c) Monitor the download process.
show download-task
Example:
firepower-2110 /firmware # show download
Download task:
File Name Protocol Server Port Userid State
--------- -------- --------------- ---------- --------------- -----
cisco-ftd-fp2k.6.3.0-1.SPA
Scp 10.122.84.45 0 admin Downloading
firepower-2110 /firmware #
Step 5 When the new package finishes downloading (Downloaded state), boot the package.
a) View and copy the version number of the new package.
show package
Example:
firepower-2110 /firmware # show package
Name Package-Vers
--------------------------------------------- ------------
cisco-asa-fp2k.9.10.1.1.SPA 9.10.1.1
cisco-ftd-fp2k.6.3.0-1.SPA 6.3.0-1
firepower-2110 /firmware #
b) Install the package.
This step erases your configuration.
Caution
scope auto-install
install security-pack version version
In the show package output, copy the Package-Vers value for the security-pack version number. The
chassis installs the image and reboots. This process can take approximately 5 minutes.
Cisco ASA and Firepower Threat Defense Reimage Guide
7
Cisco ASA and Firepower Threat Defense Reimage Guide
ASA→FTD: Firepower 2100 Platform Mode