—Network
Status of the network ports.
Connection-speed status (S):
• Green, flashing—One flash every three
seconds = 10 Mbps.
• Green, flashing—Two rapid flashes = 100
Mbps.
• Green, flashing—Three rapid flashes = 1000
Mbps.
5
Hardware Specifications
The following table contains hardware specifications for the Firepower 1010.
Table 2: Firepower 1010 Hardware Specifications
1.82 x 7.85 x 8.07 inches (4.62 x 19.94 x 20.50 cm)Dimensions (H x W x D)
3 lb (1.36 kg)Weight
30 W
Not including any PoE devices connected to the chassis. 55 W is the maximum
power for the power supply.
PoE+ is first supported in FTD Version 6.5.
Note
Use the power supply (part number 341-100765-01) that shipped with
the chassis. It supports PoE+.
Note
System power
Operating: 32 to 104⁰F (0 to 40⁰C)
Derate the maximum operating temperature 1.5⁰ C per 1000 ft above sea level.
Nonoperating: -13 to 158°F (-25 to 70°C) maximum altitude is 40,000 ft
Temperature
Operating: 90%
Nonoperating: 10 to 90%
Humidity
Operating: 0 to 9843 (3000 m)
Nonoperating: 0 to 15,000 ft (4570 m)
Altitude
0 dBaAcoustic noise
Cisco Firepower 1010 Hardware Installation Guide
11
Overview
Hardware Specifications
To Next Page
Loading...
