Package Contents
The following figure shows the package contents for the Firepower 1010. Note that the contents are subject
to change and your exact contents might contain additional or fewer items.
Figure 2: Firepower 1010 Package Contents
USB console cable (Type A to Mini Type B)
Part number 37-19770-01
2Chassis1
Power supply4Power cord
See Power Cord Specifications, on page 12 for
a list of the approved power cords.
3
—Cisco Firepower 1010
This document has a URL pointing to the
hardware installation guide, a URL pointing to
the regulatory and safety guide, and a QR code
and URL pointing to the Getting Started Guide.
5
QR Code Sticker
The QR code sticker on the front panel of the chassis points to the Firepower Easy Deployment Guide for
Cisco Firepower 1000 or 2100 Firewalls that explains low touch provisioning (LTP). LTP allows anyone to
connect a new Firepower 1010 to a network so that the IT department can onboard the device to CDO and
configure it remotely. CDO supports Firepower Threat Defense (FTD) version 6.7 and later.
The following figure shows the QR code sticker.
Cisco Firepower 1010 Hardware Installation Guide
5
Overview
Package Contents
To Next Page
Loading...
Need help?
General
