Need help?Do you have a question about the Cisco Firepower 9300 and is the answer not in the manual?
General| Chassis | Modular |
|---|---|
| Security Modules | Up to 3 |
| Firewall Throughput | Up to 1.2 Tbps |
| Management | Cisco Firepower Management Center |
| Form Factor | Rack-mountable |
| Number of Slots | 3 |
| Encryption Throughput | Up to 100 Gbps |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Humidity | 10% to 90% non-condensing |
| Altitude | Up to 10, 000 ft |
| Power Supply | Dual, hot-swappable |
| Product Type | Security Appliance |
| Supported Modules | Security, network, and interface modules |
| Redundancy | Yes |
Describes the scope of evaluation, required configuration, assumptions, and operational environment for secure deployment.
Lists the Target of Evaluation (TOE) series and models, including hardware and software configurations.
Details components the system relies on, such as management workstations, audit servers, and authentication servers.
States specific conditions expected to be met by the operational environment and administrators for secure operation.
Provides instructions for logging into the Firepower Chassis Manager via web or CLI.
Explains the audit records generated by the system for user interactions and system status messages.
Details the procedures to enable FIPS and Common Criteria (CC) modes for enhanced security.
Guides on configuring secure connections for syslog, LDAP, RADIUS, and TACACS+ servers.
Outlines key management functions including IP configuration and pre-login banners.
Describes the FIPS 140-2 self-tests performed during power-up and how to handle failures.
To Next Page