EasyManuals Logo

Cisco Firepower 9300 User Manual

Cisco Firepower 9300
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Cisco Preparative Procedures & Operational User Guide
© 2016 Cisco Systems, Inc. All rights reserved.
o auditsEnables or disables the logging of all audit log events.
o eventsEnables or disables the logging of all system events.
o faultsEnables or disables the logging of all system faults.
12) Commit the transaction:
Firepower-chassis /monitoring # commit-buffer
4.4.2 Configure Syslog via GUI
1) Choose Platform Settings > Syslog.
2) Configure Local Destinations:
a) Click the Local Destinations tab.
b) On the Local Destinations tab, complete the following fields:
Name
Description
Console Section
Admin State field
Whether the Firepower chassis displays syslog messages on
the console.
Check the Enable check box if you want to have syslog
messages displayed on the console as well as added to the
log. If the Enable check box is unchecked, syslog messages
are added to the log but are not displayed on the console.
Level field
If you checked the Enable check box for Console - Admin
State, select the lowest message level that you want
displayed on the console. The Firepower chassis displays
that level and above on the console.
This can be one of the following:
Emergencies
Alerts
Critical
Monitor Section
Admin State field
Whether the Firepower chassis displays syslog messages on
the monitor.
Check the Enable check box if you want to have syslog
messages displayed on the monitor as well as added to the
log. If the Enable check box is unchecked, syslog messages
are added to the log but are not displayed on the monitor.
Level drop-down list
If you checked the Enable check box for Monitor - Admin
State, select the lowest message level that you want
displayed on the monitor. The system displays that level
and above on the monitor.
This can be one of the following:
Emergencies

Table of Contents

Other manuals for Cisco Firepower 9300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Firepower 9300 and is the answer not in the manual?

Cisco Firepower 9300 Specifications

General IconGeneral
ChassisModular
Security ModulesUp to 3
Firewall ThroughputUp to 1.2 Tbps
ManagementCisco Firepower Management Center
Form FactorRack-mountable
Number of Slots3
Encryption ThroughputUp to 100 Gbps
Operating Temperature32 to 104°F (0 to 40°C)
Humidity10% to 90% non-condensing
AltitudeUp to 10, 000 ft
Power SupplyDual, hot-swappable
Product TypeSecurity Appliance
Supported ModulesSecurity, network, and interface modules
RedundancyYes

Related product manuals