Cisco Firepower 9300 User Manual

Cisco Preparative Procedures & Operational User Guide
© 2016 Cisco Systems, Inc. All rights reserved.
4.6 Self-Tests
Cisco products perform a suite of FIPS 140-2 self-tests during power-up and re-boot. If any of the self-
test fails, the product will not enter operational state. If this occurs, please re-boot the appliance. If the
product still does not enter operational state, please contact Cisco Support (e-mail support@Cisco.com or
call us at 1-800-917-4134 or 1-410-423-1901).
The following possible errors that can occur during this self-test are:
 Known Answer Test (KAT) failures
 Zeroization Test failure
 Software integrity failure

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes