Cisco Firepower 9300 User Manual

Cisco Preparative Procedures & Operational User Guide
© 2016 Cisco Systems, Inc. All rights reserved.
1.2 References
TOE (Target of Evaluation) References
Table 1: TOE Series and Models
TOE Configuration
Hardware Configurations
Software Version
FP 4110
FP 4120
FP 4140
FP 4150
The Firepower 4100 chassis contains the
following components:
 Network module 1 with eight fixed
SFP+ ports (1G and 10G
connectivity), the management
port, RJ-45 console port, Type A
USB port, PID and S/N card,
locator indicator, and power switch
 Two network modules slots
(network module 2 and network
module 3)
 Two (1+1) redundant power supply
module slots
 Six fan module slots
 Two SSD bays
FXOS release 2.0.1 and ASA
release 9.6.2
FP 9300
The Firepower 9300 chassis contains the
following components:
 Firepower 9300 Supervisor—
Chassis supervisor module
◦ Management port
◦ RJ-45 console port
◦ Type A USB port
◦ Eight ports for 1 or 10 Gigabit
Ethernet SFPs (fiber and copper)
 Firepower 9300 Security
Module—Up to three security
modules
◦ 800 GB of solid state storage per
security blade (2 x 800 GB solid state
drives running RAID1)
 Firepower Network Module—Two
single-wide network modules or
one double-wide network module
 Two power supply modules (AC or
DC)
 Four fan modules
FXOS release 2.0.1 and ASA
release 9.6.2

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes