Cisco Firepower 1010 Series User Manual

Figure 33: Completed Sliding Rack Tray in Rack Shelf Installation
Step 10 Install the rack shelf into your rack using the correct screws (12-24 x 0.75 inch or 10-32 x 0.75 inch) from the rack-mount
kit that fit your rack type.
You can now attach your power supply cord and run it through the cable guides.
What to do next
Install the cables according to your default software configuration as described in the Cisco Firepower 1010
Getting Started Guide.
Cisco Firepower 1010 Series Hardware Installation Guide
40
Mount the Chassis
Rack-Mount the Chassis

Cisco Firepower 1010 Series Specifications

General

Firewall Throughput (AVC)	650 Mbps
Maximum Concurrent Sessions	200, 000
Form Factor	Desktop
Memory	8 GB
Flash Memory	16 GB
Management	Cisco Defense Orchestrator
Power Supply	External
Operating System	Cisco Firepower Threat Defense (FTD)
Interfaces	8 x RJ-45, 2 x SFP