Cisco Firepower 1010 Series User Manual

1010E1010Feature
One external AC power supply
The power supply has a total of 115
W of power. There is 55 W of
+12-V system power.
Use the power supply
(part number
341-100765-01) that
shipped with the
chassis.
Note
One external AC power supply
The power supply has a total of 115
W of power. There is 55 W of
+12-V system power and 60 W of
-53.5-V PoE+ power.
PoE+ is first
supported in FTD
Version 6.5 and ASA
Version 9.13.
Note
Use the power supply
(part number
341-100765-01) that
shipped with the
chassis. It supports
PoE+.
Note
AC power supply
One 200-GB M.2 SATA SSD drive
The drive is used by the software; there is no user access to the drive.
The drive is not field-replaceable; you must return the chassis to Cisco
for drive replacement.
Storage
Four rubber feet on the bottom of the chassis
The rubber feet are needed for proper cooling. Do not
remove them.
Note
Rubber feet
Cisco Firepower 1010 Series Hardware Installation Guide
4
Overview
Features

Cisco Firepower 1010 Series Specifications

General

Brand	Cisco
Model	Firepower 1010 Series
Category	Network Hardware
Language	English