EasyManuals Logo

Cisco Firepower 1140 Getting Started

Cisco Firepower 1140
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Explicit, implied, or default
configurationConfigurationSetting
Implied.A data interface management access list rule allows HTTPS access
through the inside interface. SSH connections are not allowed.
Both IPv4 and IPv6 connections are allowed.
Firepower 4100/9300: No data interfaces have default
management access rules.
ISA 3000: No data interfaces have default management access
rules.
FTDv: No data interfaces have default management access rules.
Management access through
data interfaces.
Explicit.The time zone and NTP servers you selected.
Firepower 4100/9300: System time is inherited from the chassis.
ISA 3000: Cisco NTP servers: 0.sourcefire.pool.ntp.org,
1.sourcefire.pool.ntp.org, 2.sourcefire.pool.ntp.org.
System time.
Explicit.Either registered with a base license, or the evaluation period
activated, whichever you selected.
Subscription licenses are not enabled. Go to the smart licensing
page to enable them.
Smart license.
Default.192.168.95.1/24
Firepower 4100/9300: Data interfaces are not pre-configured.
ISA 3000: None. You must set the BVI1 IP address manually.
FTDv: 192.168.45.1/24
Inside interface IP address.
Default.Running on the inside interface with the address pool 192.168.95.5
- 192.168.95.254.
Firepower 4100/9300: No DHCP server enabled.
ISA 3000: No DHCP server enabled.
FTDv: The address pool on the inside interface is 192.168.45.46
- 192.168.45.254.
DHCP server for inside clients.
Explicit, but indirectly.Enabled on outside interface if you use DHCP to obtain the outside
interface IPv4 address.
If you use static addressing, DHCP auto-configuration is disabled.
DHCP auto-configuration for
inside clients.
(Auto-configuration supplies
clients with addresses for WINS
and DNS servers.)
Getting Started
30
Getting Started
Configuration After Initial Setup

Other manuals for Cisco Firepower 1140

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Firepower 1140 and is the answer not in the manual?

Cisco Firepower 1140 Specifications

General IconGeneral
Processor cores16
Processor familyIntel
Built-in processorYes
Firewall throughput2200 Mbit/s
IPSec VPN throughput1.2 Gbit/s
Maximum firewall connections400000
Maximum firewall connections per second100000
Wi-FiNo
Supported network protocolsSMTP
Console portRJ-45
Connectivity technologyWired
SFP module slots quantity4
Ethernet LAN (RJ-45) ports8
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1
SSD capacity200 GB
Storage media typeSSD
Form factor1U
Input current2 A
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (max)100 W
Operating altitude0 - 3000 m
Storage temperature (T-T)-25 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Country of originMexico
Quantity per pack1 pc(s)
Harmonized System (HS) code85176990
Package depth1409.7 mm
Package width990.6 mm
Package height457.2 mm
Package weight5782.31 g
Weight and Dimensions IconWeight and Dimensions
Depth436.9 mm
Width268.7 mm
Height43.7 mm

Related product manuals