Cisco Firepower 2110 Hardware Installation Guide

Figure 23: Italy CAB-ACI
Cord set rating: 10 A, 250 V2Plug: CEI 23-161
Connector: IEC 60320/C133
Figure 24: Japan CAB-JPN
Cord set rating: 12 A, 125
V
2Plug: JIS C83031
Connector: IEC 60320/C133
Figure 25: Japan CAB-JPN-3PIN
Cord set rating: 12 A, 125 V2Plug: JIS C8303/JIS C83061
Connector: IEC 60320/C133
Figure 26: Jumper CAB-C13-C14-2M
Cord set rating: 10 A, 250 V2IEC 60320/C14G1
Cisco Firepower 2100 Series Hardware Installation Guide
35
Overview
Power Cord Specifications

Cisco Firepower 2110 Specifications

General

Rack Units	1 RU
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	10% to 90% non-condensing
Maximum Concurrent Sessions	2, 000, 000
AVC Throughput	2.2 Gbps
Interfaces	8 x 1G, 2 x 10G SFP+
Power Supply	AC
Dimensions (H x W x D)	1.72 x 17.3 x 16.5 in
Storage Temperature	-4°F to 149°F (-20°C to 65°C)