Cisco Firepower 2110 Hardware Installation Guide

Figure 33: Attach the Rack-Mount Bracket to the Side of the Chassis
Rack-mount bracket2Chassis1
8-32 x 0.25-in. countersink Phillip head screws
(3 per side)
3
Step 2 (Optional) Attach the cable management bracket to the rack-mount bracket:
a) Install the cable management studs into the rack-mount bracket.
Cisco Firepower 2100 Series Hardware Installation Guide
47
Mount and Connect
Rack-Mount the Chassis

Cisco Firepower 2110 Specifications

General

Rack Units	1 RU
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	10% to 90% non-condensing
Maximum Concurrent Sessions	2, 000, 000
AVC Throughput	2.2 Gbps
Interfaces	8 x 1G, 2 x 10G SFP+
Power Supply	AC
Dimensions (H x W x D)	1.72 x 17.3 x 16.5 in
Storage Temperature	-4°F to 149°F (-20°C to 65°C)